+86-572-6588978

Method For Replacing Molecular Sieve

Jul 24, 2021

The oil and water impurities directly enter the adsorption tower with the air and are adsorbed by carbon molecular sieve, resulting in poisoning, serious damage to the analytical ability, and greatly reduce the nitrogen production capacity and purity. In addition, after carbon molecular sieve reaches a certain service life, its nitrogen purity will decrease significantly, which can not meet the service requirements. In such cases, it is necessary to consider replacing the carbon molecular sieve.

Improper operation and maintenance of molecular sieve will cause poisoning.

For example, in the early stage, the air purification is not equipped with treatment equipment or the equipped equipment operates with faults, and the carbon molecular sieve is in use.

As a result, oil and water impurities directly enter the adsorption tower with air and are adsorbed by carbon molecular sieve, resulting in poisoning, serious damage to the analytical capacity, and a great decline in the amount and purity of nitrogen production.

In addition, after carbon molecular sieve reaches a certain service life, its nitrogen purity will decrease significantly, which can not meet the service requirements.

In such cases, it is necessary to consider replacing the carbon molecular sieve.

It has metallic luster, hardness of 35 and relative density of 22.

8 natural zeolite has color, synthetic zeolite is white, and molecular sieve is powder crystal.

Insoluble in water, thermal stability and acid resistance increase with the increase of SiO2 / Al2O3 composition ratio.

Molecular sieve has a large specific surface area, up to 3001000m2 / g, and the inner crystal surface is highly polarized. It is not only a kind of efficient adsorbent, but also a kind of solid acid. It has a high acid concentration and acid strength on the surface, which can cause positive carbon ion type catalytic reaction.


Send Inquiry